Micrófono Condenser Audiotechnica AT2020
$12,000.00 / día
1 disponibles
Descripción
Audio-Technica AT2020 Specs
| Form Factor | Large Diaphragm Mic / Stand/Boom Mount |
| Intended Sound Sources | Vocals, Speech/Voice Over, Instrument |
| Sound Field | Mono |
| Operating Principle | Pressure Gradient |
| Capsule | Electret Condenser |
| Diaphragm | 0.6″ / 16 mm |
| Polar Pattern | Cardioid |
| Pad | None |
| High-Pass Filter | None |
| Tone Adjustment | None |
| Gain Adjustment | None |
| Indicators | None |
| On-Board Controls | None |
| Windscreen | None |
| Frequency Range | 20 Hz to 20 kHz |
| Maximum SPL | 144 dB SPL (1 kHz, 1% THD) |
| Impedance | 100 Ohms |
| Sensitivity | -37 dBV/Pa (Open Circuit Voltage) |
| Dynamic Range | 124 dB (Typical, 1 kHz, at Max SPL) |
| Signal-to-Noise Ratio | 74 dB A-Weighted (1 kHz, at 1 Pa/94 dB SPL) |
| Equivalent Noise Level | 20 dB SPL A-Weighted |
| Headphone Connector | None |
| Bus Power | None |
| Operating Voltage | 48 V (Phantom Power) |
| Operating Current Consumption | 2 mA |
| Color | Black |
| Mounting | Mic Clip/Stand Adapter (Included) |
| Included Case | Zipper Pouch |
| Included Filters | None |
| Dimensions | ø: 2.05 x L: 6.38″ / ø: 5.21 x L: 16.21 cm |
| Weight | 12.1 oz / 343 g
|
The black Audio-Technica AT2020 Cardioid Condenser Microphone is designed to bring sonic performance distilled from the company’s reputable studio condensers to the realm of home recording for podcasters, musicians, and content creators. The capsule features a low-mass, side-address diaphragm with a cardioid polar pattern for rejecting ambience and noise behind the mic, a welcome trait when tracking in untreated rooms. It comes with a pivoting stand mount for straightforward attachment to your existing mic stand.
The AT2020’s extended, linear frequency response enables the flexibility to accurately reproduce signals from a wide variety of sources such as vocals, speech, and instruments. High SPL handling and wide dynamic range allow the AT2020 to capture loud signals with minimal noise and distortion. Since the AT2020 is a solid-state condenser with an XLR output, it should be mated to an XLR-equipped mic preamp capable of sending 48V phantom power.
- B&H is proud to be partnering with Audio Test Kitchen, the world’s most comprehensive online audio product comparison platform, to improve the resources provided to our customers shopping for the right microphone for their given application.
- This provides you with the ability to listen to a growing selection of microphones with spoken word recordings captured in a standardized environment, with levels matched by the talented engineers at Audio Test Kitchen in its impressive reference studio.
- Audio Test Kitchen records microphones under identical conditions so you can compare them, apples-to-apples. The source, signal chain, and level never change. The only differences you will hear are between the microphones.
- Custom-engineered 0.6″ low-mass diaphragm
- Extended frequency response and superior transient response
- High SPL handling and wide dynamic range provide great versatility
- Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source
- Stand mount allows placement in tight spots
- Operates on 48 VDC phantom power from a range of devices such as portable mixers, desktop audio interfaces, or external mic preamps
- Balanced XLR 3-pin output connector
